John Sinclair 3D Printed Raspberry Pi 4 Case
I purchased the John Sinclair 3D Printed Raspberry Pi 4 case from eBay, though the design is available on Thingiverse
Read more
Raspberry Pi
Raspberry Pi 4 Cases, Temperature and CPU Throttling Under Load
So far I’ve examined the following topics relating to the Raspberry Pi 4, especially the issues with the temperature: Initial
Read more
WiFi Signal Strength with Raspberry Pi 4 Cases
Following a comment from Geir on a previous blog post, where he asked if the metal enclosures which may help
Read more
Cool Cases for the Hot Raspberry Pi 4
Whilst we await Software/Firmware updates from the Raspberry Pi team to reduce power usage and thus reduce temperatures, I’ve continued
Read more
Raspberry Pi 4 – Power & Temperature at Idle
In my previous post, I examined how to attempt to cool the hot running Raspberry Pi 4. Here I wanted
Read more
Cooling Options for the Hot Raspberry Pi 4
As previously covered the latest Raspberry Pi 4 is running too hot, such that it can’t even be used in
Read more
Raspberry Pi 4 Hot new release – Too hot to use enclosed
This post is now Part 1 of a series, covering the cooling for the Pi4, you may also want to
Read more
Raspberry Pi PoE HAT – Official Modified Version
As I covered in depth in my previous post Raspberry Pi Official PoE-HAT – FAIL! If you want to use the
Read more
Raspberry Pi Official PoE-HAT – FAIL! If you want to use the USB Ports (last updated: 27 October 2018)
LATEST UPDATE: The PoE HAT has been updated, see my later post: Raspberry Pi PoE HAT – Official Modified Version I’ve
Read more
Node-RED Support for Pimoroni Automation-HAT/pHAT
I’ve recently been looking at how to simplify how non-programmers can start to create home automation solutions and stumbled across
Read more